When operating the checkweigher, what aspects need to be paid attention to? Today, I will summarize 8 important precautions for the operation of automatic checkweigher.

Important precautions for automatic checkweigher operation

1

The sensor of the checkweigher is a very sensitive measuring device and must be treated with care. Avoid vibrations, squeezing or objects falling on the weighing platform (weighing conveyor belt). It is forbidden to place tools on the weighing platform.

2

During the transportation of the checkweigher, the weighing conveyor belt must be fixed in its original position with screws and nuts.

3

During the transportation of the checkweigher, the weighing conveyor belt must be fixed in its original position with screws and nuts.

4

Please keep the weighing belt conveyor of the checkweigher clean, because stains or residues left by the product may cause malfunctions. You can use compressed air to blow away the dirt or wipe with a moistened soft cloth.

5

If the checkweigher is equipped with a belt conveyor, please check the conveyor regularly. The conveyor belt must not touch any guards or transition plates (smooth plates between adjacent conveyor belts), as this will cause additional wear and vibration, which may have a negative impact on accuracy. If guards are installed, check that they are in good condition and that they are installed in the correct position. Replace worn belts as quickly as possible.

6

If the checkweigher is equipped with a chain conveyor, check the guards regularly to make sure they are in good condition and installed in the correct position.

7

When installing a rejector with an independent base or a rejector with an independent bracket (column), please make sure that the foot screws or the bottom plate are firmly fixed on the ground. This can reduce disturbing vibrations.

8

Keep a stock of spare parts, especially spare parts that are prone to wear, so as to shorten the downtime caused by damaged spare parts.

END

Precautions

Automatic checkweigher cleaning must be powered off for operation

Those who do not understand the technology should not disassemble the automatic checkweigher

For inquiries, please contact the manufacturer of the SYNDRA checkweigher